53tp series ip00 ? three-phase solid-state relay; ratings 25a, 50a per phase @ 48-530 vac ? 2 package styles ip00 or ip20 (see ip20 spec sheet for more information) ? scr output for heavy industrial loads ? transient protection built in ? ac or dc control ? zero-crossing (resistive loads) or random-fire (inductive loads) output ? led input status indicator ? ul recognized, ce compliant to en60950-1 product selection control voltage 25a 50a 90-280 vac a53tp25d a53tp50d 4-32 vdc D53TP25D d53tp50d available options output specifications (1) description 25 a 50 a operating voltage (47-63hz) [vrms] 48-530 48-530 transient overvoltage [vpk] (2) 1200 1200 maximum off-state leakage current @ rated voltage [marms] 10 10 minimum off-state dv/dt @ maximum rated voltage [v/sec] (3) 500 500 maximum load current [arms] (4) 25 50 minimum load current [arms] 0.05 0.05 maximum surge current 50-60 hz (16.6ms) [apk] 239/250 597/625 maximum on-state voltage drop @ rated current [vpk] 1.6 1.6 thermal resistance juncti on to case (rjc) [c/w] 1.02 0.63 maximum i2t for fusing 50-60 hz (8.3 msec) [a2 sec] 285/260 1779/1620 minimum power factor (with maximum load) 0.5 0.5
input specifications (1) description d53 a53 control voltage range 4-32 vdc 90-280 vrms minimum turn-on voltage 4.0 vdc 90 vrms minimum turn-off voltage 1.0 vdc 10 vrms minimum input current (for on-state) 19 ma @ 4v 2.2 ma @ 120v maximum input current 25 ma @ 32v 10ma @ 240v nominal input impedance current limiter current limiter maximum turn-on time [msec] (5) 1/2 cycle 50 maximum turn-off time [msec] 1/2 cycle 50 general specifications description parameters dielectric strength, input/output/base (50/60hz) 4000 vrms minimum insulation resistance (@ 500 v dc) 10 9 ohm maximum capacitance, input/output 8 pf ambient operating temperature range -40 to 80c ambient storage temperature range -40 to 125 c weight (typical) 10.3 oz (315g) encapsulation thermally conductive epoxy terminals nickel plated brass screws and saddle clamps zinc plated steel input terminal screw torque range:[in lbs/nm] 8-10 / 0.9-1.1 output terminal screw torque range:[in lbs/nm] 15-20 / 1.7-2.2 general notes 1) all parameters at 25c unless otherwise specified. 2) relay will self trigger between 900-1200 vpk. 3) off-state dv/dt test method per eia/narm standard rs-443, paragraph 13.11.1 4) heat sinking required, s ee page 4 for derating curves. 5) turn-on time for random turn-on vers ions is 0.02 msec (dc control models)
mechanical specifications wiring diagram
thermal derate information agency approvals input : en61000-4-2, level 3 esd en61000-4-4, level 3 burst output : en61000-4-2, level 4 esd en61000-4-4, level 4 burst en61000-4-5, level 4 surge en60950 : meets the requirements of sections1.5: 1,7: 2.9: 2.10.5.3: 4.2: 4.5: 4.7: rev. 120811
annex - enviromental information
|
